Planning-First Design
Share your room dimensions and photos. We’ll review the space and help define a coordinated simulator package, with the equipment, price and setup scope confirmed before you order.
Room review first. Final equipment is confirmed in your quote before payment.
A clear, itemized view of the hardware categories proposed for your build. Manufacturer slots are shown as editable placeholders: exact models, brands and inclusions are confirmed once your quote is issued.
Powder-coated aluminium frame with acoustic side walls and a 4mm polycarbonate front shield, sized to your room dimensions.
Proposed: Manufacturer TBC
Commercial-grade woven impact screen with hemmed pocket, rear tension bar and a matte finish for clean projection.
Proposed: Manufacturer TBC
Floor-mounted radar or camera unit capturing ball and club data, compatible with the leading simulation software suites.
Proposed: Manufacturer TBC
Short-throw 1080p laser projector at 3,000+ ANSI lumens, ceiling-mounted on a fixed bracket for edge-to-edge image.
Proposed: Manufacturer TBC
Dedicated rig with a discrete graphics card, 32GB RAM and 1TB NVMe storage, pre-configured with your simulation software.
Proposed: Manufacturer TBC
Commercial putting turf on a foam underlay, fitted with a rubber tee line and a 2m hitting strip for realistic ball response.
Proposed: Manufacturer TBC
Final inclusions, brands and models are confirmed in your itemized quote.
Buying the pieces separately means chasing compatibility, delivery dates and installs yourself. One package removes that work from your plate.
Every component is sized and positioned against your room before anything is ordered. No guesswork, no retrofit once the bay is built.
One itemised list of hardware, software and fittings, so you know exactly what arrives, what it connects to and what it replaces.
Our team maps the install sequence with your fitter, from first measurement to the first round played in the bay.
Three measurements decide what your room can host: width across the swing, depth from screen to back wall, and ceiling height at the tee line. Handedness adds a fourth. No two rooms land on the same numbers, and no generic chart can approve yours.
Minimum 3.6 m clear wall to wall across the ball position, measured at the screen line.
4.5 m from screen to back wall, including 2.4 m of tracked ball flight in front of the tee.
2.9 m floor to ceiling at the tee line, clear of beams, downlights and any fitting inside the arc.
1 m either side of the swing arc, with room to switch between right and left handed setups.
Every room is reviewed by a human fitter, never an automated chart.
Four consultative steps, one itemized quote. You see every component, tax, and delivery estimate before a single order is placed.
Send dimensions, photos, and ceiling height. We check framing, floor level, and lighting so your proposal reflects the room you actually have.
We map the enclosure, screen, and tracker positions, then send a scaled layout showing swing clearance and sight lines before anything is ordered.
Confirm components, finishes, and tracker type. Your itemized quote lists applicable taxes and freight as separate line items, never bundled.
Lead times are confirmed in writing, delivery is scheduled to your door with a dated estimate, and our team coordinates installation and calibration.
No surprises at checkout: taxes, freight, and delivery windows are itemized in your quote before you approve.
A short walkthrough of a finished simulator room, filmed on site before handover.
Same room, two hardware paths. Every quote is itemized line by line, so you can see exactly what moves when the tracker leaves the floor and climbs to the ceiling.
The baseline build. Trackers sit at floor level along the tee line and read ball flight from a low, forward angle. The simplest path when the ceiling is already spoken for.
Proposed Only. Hardware scope is confirmed after the room survey.
The elevated build. Trackers mount above the hitting bay, clearing the floor entirely and reading the full downswing and putt line from overhead.
Proposed Only. Hardware scope is confirmed after the room survey.
Everything you agree to is written in plain language below: software renewals, component warranties, and the exact scope of what our team supports after installation.
Terms shown are editable placeholders pending final legal review. Replace bracketed copy with your signed agreement language before launch.
Questions about coverage? [insert support email or phone]
Your simulator software licence renews every [insert renewal period]. Course library additions, feature updates, and performance patches are included for the life of an active subscription. If a subscription is not renewed, core offline play and installed course content remain available.
Renewal date: [insert date]. Notice period: [insert days]. Auto-renewal: [yes or no].
Launch monitor, sensor array, and projection components are covered against manufacturing defects for [insert warranty period] from the date of installation. Coverage excludes [insert exclusions, for example accidental damage, liquid ingress, or unauthorised modification]. Consumable items such as [insert items] are not covered.
Warranty start: [insert installation date]. Claim window: [insert response time].
Remote diagnostics, calibration guidance, and software troubleshooting are included at no additional cost for the term of your agreement. On-site service visits are scheduled within [insert response window] and are [included or billed separately] under your package. Commissioning, room preparation, and structural works are outside support scope.
Support hours: [insert hours]. Escalation contact: [insert email or phone].
Straight answers on clearance, handedness, tracking and delivery, so you can check your room with confidence instead of guesswork.
Yes. The enclosure is built with a minimum 2.6m internal height at the hitting zone, which clears a standard driver swing for players up to 2m tall. If your ceiling is lower than that, we will tell you before you order and suggest a reduced-swing configuration.
Absolutely. The bay is configured as a centred hitting zone, so right and left-handed players share the same mat and screen with no reconfiguration. Mixed groups simply step in and play.
The standard build uses a floor-mounted optical tracker that measures ball speed, launch angle, spin and club data. An overhead tracker is available for rooms with tighter floor space or high ceilings. Both are calibrated on installation.
Components ship on a single pallet and typically arrive within 10 to 15 working days. Installation is scheduled with our team and completed in one day, including calibration, software setup and a walkthrough of your first round.
A room specialist reviews your dimensions, ceiling height and clearance, then comes back with a fit assessment and a recommended configuration within one business day. There is no obligation and no charge for the review.
Send over your dimensions and we will confirm the fit.
[email protected]
Replies within one business day.
No obligation. Takes about 2 minutes.

[Founder Name] here. I have spent fifteen years fitting golf simulators into rooms people swore were too small, and the lesson has never changed: the room decides the build, not the brochure.
Before anyone talks price, we measure ceiling height, wall clearance and how you actually practise. What you see on this page is the same setup we would build for you, not a showroom trick.